Seal The Gaps: Fire Stopping Systems And Solutions PROMASTOP® and PROMASEAL®

An electrical cable tray penetration seal protected with PROMASTOP®-I water-based intumescent fire stopping coating

In every application, the importance of fire stopping - sealing any gaps in fire resistant constructions - is vital to maximize its ability to save life and property. Such gaps include service penetrations through walls and floors, either due to poor workmanship or left for structural movement.

Concealed spaces or cavities in the construction of a building provide ready route for smoke and flame spread. This is particularly so in the case of voids in, above and below the construction of a building, e.g. wall, floors, ceilings, roofs and facades. As any spread is concealed, it presents a greater danger than would a more obvious weakness in the fabric of the building.

It is important to note that every service passing through fire resistant building elements reacts in a different way in the event of fire, so there is no single system, solution or product that will protect all services.

What is The Ideal Fire Stopping Solution For You?

Factors for consideration when determining the correct specification to ensure a wall or partition will provide the required fire performance include:

  • Fire resistant period
  • Insulation requirement
  • Wall, floor, linear gap
  • Movement – vibration and thermal expansion
  • Mechanical strength – load bearing

Promat offers a full range of products and solutions for a variety of fire stopping applications.

The Promat PROMASEAL® and PROMASTOP® Range

The Promat PROMASTOP® and PROMASEAL® range of fire stopping products is one of the most comprehensive in the industry. It is comprised of a number of sealing solutions, from intumescent and silicone sealants, through to fire pillows and the unique Promat PROMASTOP®-FC MD.

Fire stopping systems such as these have a proven track record of sealing the penetrations found in buildings during construction, such as power cables, plumbing and heating pipes, ventilation ducts, movement joints etc. Every service passing through fire resistant building elements reacts in a different way in the event of a fire, so there is no single solution or product that will protect all services. The Promat PROMASEAL® and PROMASTOP® range is designed to offer specific protection for individual penetrating elements. The products have been tested to the highest standards, manufactured using the highest quality materials and are third party accredited under the CERTIFIRE scheme.

< Back

 

 

Promat Technical Support

Contact our technical support team with your questions on passive fire protection solutions, our products and systems or installation advice.

Technical Documentation

Find the product datasheets, system brochures, declarations of performance, installation manuals and other documents you need to get the job done.