Back to solutions

PROMASEAL®-AG

Product details

Fire protection product
PROMASEAL®-AG
PI number
pi314942

Specifications

Fire rating performance
E 120 - EI 120
Diameter
≤50 mm
Compartment type
Rigid Floor, ≥150 mm
Service installation
Electric, Conduit with/without cables

Installation details

PROMASEAL®-AG

Fire rating performance
E 120 - EI 120
Fire rating direction
Floor - fire from below
Service type
Electric Flexible conduits Ø ≤ 50mm vlg. EN 61386-21 en EN 61386-22 with or without cables Ø≤ 21mm. flexible pipe bundle up to 5x Ø ≤ 50mm possible
Rigid Floor, ≥150 mm
Service details
ø ≤50 mm, Floor - Vertical
Annular gap
Complete mineral wool filling (A1) + PROMASEAL®-A, 15mm, both sides, Width: 20 mm
Minimum suspension
Floor - upperside, 250 mm
Report number
ETA 16-0309
Test standard
EN 1366-3
In any case the products must be applied by the user in accordance with all applicable standards, regulations, laws, installation guidelines and with the applicable national test certificates and approvals. The user should always use the latest version of the applicable ETA and product information sheets. Products may only be applied by trained professionals with adequate knowledge and only after thorough review of the installation guidelines, safety data sheets, national test certificates and approvals. In case of any doubt about the application, please contact your local Promat office. For Non-European Union countries separate guidelines are applicable and the user should therefore always contact the local Promat office.