PROMATECT®-XS

PROMATECT®-XS is an A1 non-combustible board that offers a quick installation providing 60 minutes fire resistance for lightweight mezzanine floor constructions. The board is moisture resistant, allowing installation in unheated spaces and has a smooth, impact resistant surface. The board can be left undecorated or easily finished with paints.

PROMATECT®-XS
PROMATECT®-XS Pallet
MZ PXS-REI60-001S
PROMATECT®-XS Pallet
MZ PXS-REI60-001S

Further Information

Applications:

  • Fire Protection to Mezzanine floors
  • Where there is a need to install before the building is weathertight

Benefits:

  • Designed for installers to save cost and save time
  • Up to 60 minutes fire protection
  • Speed and ease of install
  • Low board thickness needed for any given fire protection
  • Easy installation with staple fixings and no glue or filler
  • Suitable for use in fully exposed environments for up to 6 months
  • Can be installed in the early construction phase when the building is not weathertight
  • Single thickness for ease of specification and stocking
Reaction to fire: A1, non-combustible
Use Category: Y, Z2
Approx. Thermal Conductivity @ 20 °C (W/m°K): 0.3 W/m K
Bending Strength Longitudinal (N/mm²): 5 N/mm²
Tensile Strength Longitudinal (N/mm²): 1.5 N/mm²
Compressive Strength (N/mm² perpendicularly to the board surface): 6 N/mm²
Storage Conditions: Store in a dry and well-ventilated space, under cover, on a flat surface.

Please note
All physical and mechanical values are averages based on standard production and tested according to internal procedures. The typical values are given for guidance. The figures can change dependent on the test methods used. If a particular value is of prime importance for a specification, please consult Promat Technical Department.

 

Downloads

Related documents